Polypropylene (PP) is a white granular polymer - product of the polymerization of propylene. Among all plastics it has the lowest density of 0.90 g/cm3, is resistant to abrasion, is almost not exposed to corrosion spreading and more heat-resistant than polyethylene. However, polypropylene has greater sensitivity to light and oxygen, which decreases with introduction of stabilizers.
There are such main types of polypropylene as homopolymer, block copolymer and random copolymer.
Homo-polymer of propylene (homo-PP) has a crystalline structure. The main advantage of homo-PP is the presence of highly hard mechanical properties. Homo-polymer has high stiffness, but at low temperatures it becomes very fragile. At low temperatures, it is recommended to use the block copolymer.
Block copolymer (block-PP) is characterized by improved impact resistance, which explains the increased frost resistance of the material. Improving the impact resistance is accompanied by decrease in hardness and stiffness of the material.
Random-copolymer (random-PP) has good insulating properties, although slightly worse than the homo-polymer and, especially the block copolymer, but these properties are maintained in a wider temperature range. Mechanical properties of random copolymer have an intermediate position between homo - and block-copolymers, characterized by a balance of stiffness and impact resistance.
Processing of polypropylene is implemented by means of injection molding, film blowing, sheet extrusion, blow molding extrusion, injection blow molding, injection molding, compression molding.
The main products of polypropylene: films, pipes, bags, items of technical equipment and vehicles, household items, non-woven materials.
|Homo, yarn||TPP D30S||TKNPZ, TM||2,7-3,7||Excellent machinability, excellent mechanical properties||Monofilament, yarn, filamentary threads, rigid sheets for molding food packaging|
|Homo, film (BOPP)||TPP D382BF||TKNPZ, TM||2,7-3,7||Excellent dielectric properties, high transparency, high strength and stability during processing||BOPP films and PP films|
|Homo, fibre||TPP F79FB||TKNPZ, TM||10-15,||Excellent technical ability of sizing fibers and high resistance to fading||Fiber for the production of products in medical fields, filters and fibres in the automotive, light and furniture industry|
|Homo, yarn||LH5072-03.O||SC Turkmengas, TM||3,0-4,0||Production of stretched tape (raffia), which is used in the production of woven fabric for the carpet base, burlap, in the production of geotextile, tourniquet and twine|
|Homo, yarn||Y-130||Uz-Kor Gaz, UZ||3-5,||High strength, Good melting processability, Good anti gas-fading||Monofilament, Yarn|
|Homo, film (OPP)||FO-130A||Uz-Kor Gaz, UZ||2,8-3,2||Good gloss, transparence and antistatic||General OPP film|
|Homo, fibre||FR-160||Uz-Kor Gaz, UZ||24-27||Good anti gas-fading & Weatherability||Multifilament, Belt|
|Homo, fibre||FR-170H||Uz-Kor Gaz, UZ||8-12,||Good anti gas-fading & Weatherability||Multifilament, BCF, Staple fiber|
|Homo, injection||J-150||Uz-Kor Gaz, UZ||23-33||High stiffness||Housewares, General supplies|
|Homo, injection||J-160||Uz-Kor Gaz, UZ||0,8-1,2||High stiffness||Housewares, General supplies|
|Homo, injection||J-170T||Uz-Kor Gaz, UZ||14-22||High stiffness, flowability and good transparency||Housewares, General supplies, Transparent stationery, Disposable syringes|
|Block, sheet||B-320||Uz-Kor Gaz, UZ||13-19||High transparency, High processability||Industrial sheets, Food packaging tray, etc.|
|Block, injection||J-350||Uz-Kor Gaz, UZ||8,0-12,0||High stiffness and high impact resistance||Battery case, Case for home appliances|
|Block, injection||J-360||Uz-Kor Gaz, UZ||55-65||High stiffness and high impact resistance||Battery case, Case for home appliances|
|Block, injection||JM-380||Uz-Kor Gaz, UZ||7-9,||High stiffness, flowability and high impact resistance||Big size injection molding products Electric home appliances|
|Random, film||FC-550||Uz-Kor Gaz, UZ||15-19||Good transparence and low heat seal temperature||Heat sealant layer for CPP film|
|Random, injection||J-560S||Uz-Kor Gaz, UZ||14-22||Good stiffness / impact balance, High transparency, High gloss, High hinge property, Low smell||Cosmetics container & cap, Food container, Transparency case, Stationery, Disposable syringe, CD/DVD case, etc|
|Random, injection||J-570S||Uz-Kor Gaz, UZ||23-33||Good stiffness / impact balance, High transparency, High gloss, High hinge property, Low smell||Cosmetics container & cap, Food container, Transparency case, Stationery, Disposable syringe, CD/DVD case, etc|
|Homo||PP H030 GP||Poliom, RU||2,5-3,5||Heat stability, resistance to corrosion, resistance to thermo-oxidative degradation||Sheets and profiles, yarn, injection molding of various products and production of mixtures for various application|
|Homo||PP H030 GP/3||Tobolsk-Polymer, RU||3||Medium melt flow range, an optimal stabilization package and balanced physical and mechanical properties||General purpose grade, it is recommended for Injection Molding, Extrusion and Thermoforming|
|Homo||Balen 01030||UOS, RU||2,4-4,0||High resistance to thermo-oxidative aging, increased resistance to fading and cleaning agents, improved technology and antistatic properties||Products technical and a household purpose, food contact, toys|
|Homo, injection||Balen 01270||UOS, RU||22-30||High resistance to thermo-oxidative aging||Textured and not textured filament, thin staple fibers, products, food contact products, toys|
|Block, injection||Topilene J945||Hyosung Chemical, KR||53,0||Super high flowability, Excellent stiffness, High impact strength, complies with FDA requirements in the code of Federal Regulations in 21 CFR 177.1520 for food contact.||Industrial articles (Big size containers, Thin wall containers, etc), Electric appliances (Washing machine, etc), Stationery, Housewares, General goods, Base resin for PP compound|
|Random, injection||Topilene R901||Hyosung Chemical, KR||45,0||High transparency, Excellent flowability & Processability, Phthalate Free, Non Peroxide Cracking, Excellent stiffness and impact strength balance, it complies with FDA requirements in the code of Federal Regulations in 21 CFR 177.1520 for food contact. This product pas sed the European Pharmacopoeia t est(EP 3.1.6) and can be used as a medical purpose||Industrial articles (Big size containers, Thin wall containers, etc), Electric appliances (Washing machine, etc), Stationery, Housewares, General goods, Base resin for PP compound|
|Random, pipe||Topilene R200P||Hyosung Chemical, KR||0,25||Excellent long term hydrostatic pressure resistance and heat stability, Excellent stiffness and impact strength balance, Chemical stability, Environment friendly, Enhanced processability||Hot & cold water supply pipes and fittings / Radiator connecting pipes|
|Block, injection||BI961||Samsung Total, KR||60,0||High stiffness & flowability, Excellent balance between stiffness & impact strength, it meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.||Large E&E articles, base resin for PP compound (auto & E&E) thin wall injection molding (TWIM) containers, housewares|
|Block, injection||PB5000B||CIPLAS, USA||49,0-51,0||Product is used for injection molding application, including consumer products and rigid packaging.|
|Random, injection||RP9040||CIPLAS, USA||39,0-41,0||High clarity||Product is used for injection molding application, including consumer products and rigid packaging.|